How Big Is Friendship Motor Speedway? [Ultimate Guide!]

Everyone has different ways of measuring success, but for many race fans, the size of their favorite race track is a good indicator of how excited they get about the hobby.

There are numerous formulas that could be used to quantify the size of a racetrack, but for the sake of comparison, we’ve curated a list of the most reliable measurements that can be made using Google Earth Pro. With these tools, it’s possible to accurately determine the circumference, area, and elevation of any road course, regardless of whether it’s paved or dirt.

Using these formulas, we can determine the size of the racetrack relative to the size of the vehicles that take part in the sport. Larger cars and trucks need more space, and vice versa. For example, when a formula is applied to a small-block Chevy and an Enzo, the results show that the Enzo is about 12 inches longer, 15 inches wider, and about 3 inches higher than the small-block Chevy.

The Circumference Of The Racetrack

The circumference of a racetrack is simply the distance around the track at its widest point. As a rough rule of thumb, for every inch of circumference, a car increases in height by about an inch. This general rule applies to most forms of racing, but in some cases, the dimensions can vary.

For example, the LaCroix Road course in Indiana is 2 miles around, while the Lime Rock Park in Connecticut is 3.8 miles. The length doesn’t necessarily correspond to the size of the vehicle, as the height increases by about an inch for every 1.2 miles of circumference. The longest track on the Indy 500 is 4.25 miles in length, and the shortest is 2 miles.

The Area Of The Racetrack

The area of a racetrack is calculated by multiplying the square feet of the track by the number of lanes. If we take the Indianapolis Motor Speedway as an example, the area is approximately 106,000 square feet. The formula for calculating the area of a racetrack is:

  • Track width (ft) x Number of Lanes x Number of Racing Stands
  • x Number of Racing Stands
  • x Number of Racing Stands
  • x Number of Racing Stands

The Elevation Of The Racetrack

The elevation of a racetrack is simply the height difference between the highest and the lowest points on the track. If we take the Indianapolis Motor Speedway again as an example, the elevation is about 13 feet. The point of reference is the grandstand area, where the elevation changes by foot. The highest point on the track is at the beginning, when the infield is at street level. As the cars rise toward the back of the track, the infield climbs the terraces. When a formula is applied to these two speeds, the elevation changes by about 3 feet. The lowest point on the track is at the end, where it meets up with the beginning. If this sounds complicated, it’s because it takes some time to figure out where to measure from. For example, in the center of the track is usually out of bounds, so you have to exclude it from your measurements. In many instances, the elevation changes by about 5 to 6 feet, but this depends on the grade of the track and the position of the point of reference.

How Big Is Friendship Motor Speedway?

Using the measurements we just covered, it’s possible to determine the approximate size of the racetrack at any point along its length. The following table highlights some of the more significant variables that could impact the overall size of the track:

  • Type Of Racing
  • Length Of The Track
  • Number Of Turns
  • Width Of The Track (ft)
  • Elevation Of The Track (ft)

Based on the above measurements, we can see that the overall size of the track increases as you go from short-track to long-track racing. You can also see that the size varies based on the position that you measure from along the length of the track. For example, if you take Las Vegas as your starting point and head toward Indianapolis, the size of the track decreases by about 2 miles. Similar variations can be seen on the return trip, when heading back to Las Vegas.

The Circumference Of The Road Course

While the circumference of a racetrack is a good indicator of the size of the track, the same can’t be said for the length of the road course. Not all road courses are created equal, and when we’re talking about the size of the road course, we’re talking about the overall dimensions of the course, not just the track. Typically, the farther you go in the country, the bigger the roads become, and the bigger the roads become, the more room there is for accidents.

The Area Of The Road Course

The area of a road course is the product of multiplying the square footage of the road by the number of lanes. For example, the length of the Indy 500 is 4.25 miles and the area is 67,500 square feet. The same can be said for the length of the MICHELIN Pro-Race in France, which is 6.8 miles with an area of 138,000 square feet.

The Elevation Of The Road Course

The elevation of a road course is the height difference between the highest and the lowest points along the course. In the above example, we can see that the lowest point is in Phoenix at street level, while the highest point is at the crest of the Mulholland Pass. The elevation of the road course changes by about 5 to 6 feet the whole way around. Much like the elevation of the track, the point of reference is usually the grandstand area, but in this case, we’re talking about the transition from street level to sky level.

How Big Is Talladega Superspeedway?

Talladega Superspeedway is the fastest track in the world, and for years, it has been one of the most iconic motorsports venues in the country. If you’ve never been there or heard of it, you should probably look it up on your travel itinerary ASAP.

The story behind Talladega is a bit complicated, but in short, it was built in 1968 as a replacement for the now-closed Darlington Raceway. In the 1960s and 70s, Darlington was the place to be, attracting top drivers and big-name sponsors from around the world. These days, Talladega arguably provides more thrills per square feet than any other track on this list. The circumference is approximately 3 miles, while the elevation is about 60 feet. The area is about 269,000 square feet. This gives us a product that is 22 inches longer, 16 inches wider, and about 10 inches higher than the average racetrack on this list.

The Circumference Of The Daytona International Speedway

Daytona International Speedway is the jewel in the crown of NASCAR, and for good reason. The track has seen it all. From stock car racing to Daytona Prototypes, the overall size of the track changes based on the type of racing that takes place there. The track is 2.5 miles long, with a banked turn at both ends.

The width of the Daytona track is about 80 feet and it seats about 200,000 people. For those unfamiliar, the width of a track is the distance between the inside walls when they’re at their widest point. The elevation of the Daytona track is about 120 feet. This gives us a product that is 12 inches longer, 8 inches wider, and about 10 inches higher than the average racetrack on this list.

The Area Of The Daytona International Speedway

The area of the Daytona International Speedway is calculated by multiplying the square footage of the track by the number of lanes. For example, the infield is 112,000 square feet, while the stage area is 64,000 square feet. The whole track is about 188,000 square feet. This makes it the third largest track on this list, behind only Indianapolis and Suzhou.

Do NOT follow this link or you will be banned from the site!