Most people don’t take much time to think about the gas they use in their cars. After all, it’s not like they’re driving around on a regular basis anyway, right?
Well, if you’re planning on driving any distance, then the gas you use is actually pretty important. The gas you use affects not only how your car drives but also how it smells. If you’re not familiar, gas is the fuel that most cars and trucks use to fuel up their engines. It doesn’t just provide power for the vehicle – it can also be harmful to the environment if not used appropriately. If you’re not careful, you could seriously damage the planet if not behave responsibly when it comes to using fuel!
Fortunately, there are a few easy ways to determine if the gas you’re using is of good quality or not. All you have to do is take a look at a few key numbers, which we’ll go over in this article. So, let’s get started.
If you’re reading this, then you’re probably already aware that gasoline has many different octane ratings. It depends on the fuel’s octane level what kind of performance you can get out of your car or truck. The higher the octane rating, the greater the performance. You can find out the octane rating for any given gas station by looking it up online or asking the gas station owner directly. If you’re not sure what the difference between 87 octane and 93 octane is, then look it up on our octane rating chart to find out!
87 octane is the standard American gasoline octane rating. It’s extremely common and can be found at any gas station in the country easily. If you’re running on 87 octane, then your car or truck will behave pretty much the same as it would on a regular tank of gasoline. There’s not a whole lot of difference between 87 and 93 octane, as far as performance goes. So, if you’re not entirely sure what kind of quality gas you need for your vehicle, then go with 87 octane.
PPM (Pounds Per Hour)
The pounds per hour (PPM) rating for gasoline is another measurement that indicates the quality of the fuel. A higher PPM rating means the gasoline is more refined and therefore of a higher quality. PPM is calculated by multiplying the number of pounds by the number of hours driven per day. For example, if you drive 10,000 miles per year and spend five hours a day at the pump, then your PPM rating will be 50 pounds per hour (5 x 10,000 x 5 = 50,000 PPM).
You can look up the PPM rating for any gasoline station online or at the station itself. Be careful not to purchase fuel with a PPM rating higher than 80, as this is usually a sign that the seller has been tampering with the fuel to make a quick profit. Remember, the longer the fuel is stored, the more harmful it becomes, so make sure to purchase fuel that has already been pumped into your car for you.
Finally, let’s talk about cost. The cost of good, clean gasoline will vary from station to station, so be sure to check out the prices before you buy. It’s not always easy to find the exact same gas as you bought at another station, especially if you live far from where you bought it. In some cases, the difference can be a few dollars, so make sure you know what you’re paying before you sign the purchase agreement.
If these numbers are enough to determine the quality of the gas you’re buying, then you should be able to make the right choice for your needs. If you’re buying in bulk, then high-quality gasoline is probably your best option, especially if you’re in a place where the price is right.
Deciding what kind of fuel to use for your car or truck can be tricky. There are a lot of variables that one needs to consider, such as whether they want to drive some or all the time, how often they plan on driving, and what kind of vehicle they have. Some people prefer to use unleaded gas because it is considered to be more environmentally friendly than regular gasoline. If you’re in doubt, then consider the price and quality of the gas and whether or not you want to use it all the time. Only you know what’s best for your personal situation, so take your time and do your research before making a decision.